Error Code E tt
Water Tank Switch Error — Water tank not assembled correctly or water tank switch error.
Moderate
Address soon - your appliance may not work properly
Also displayed as: E tt
How to Fix
- 1
Step 1: Remove and re-seat the water tank to ensure proper assembly.
- 2
Step 2: Inspect water tank switch for proper engagement.
- 3
Step 3: If error persists, replace the water tank switch.
- 4
Step 4: If error persists, replace the Main PCB.
Other Error Codes for LHSXS2706W
Wi-Fi PCB Abnormal — Wi-Fi PCB and display PCB connection fail or Wi-Fi PCB defective. Applies only to GID & Best models with Wi-Fi.
Freezer Sensor Error — Freezer sensor short or open
Refrigerator Sensor Error — Refrigerator sensor (upper part) short or open
UV/Nano LED Module Error — Bad UV LED module or poor connection between display and UV module. Caused when feedback signals are abnormal.
Defrost Sensor Error — Defrost sensor short or open
Failed Defrosting — Defrost heater, temperature fuse short circuited or unplugged connector. Error indicated 4 hours after failure occurs.
Abnormal Freezer Fan Motor — Connection line of fan motor is fault, short, or open. Fault displayed when operating fan motor for 65 seconds without output signal.
Condenser Fan Motor Error — Connection line of condenser fan motor is fault, short, or open. Fault displayed when operating fan motor for 65 seconds without output signal.